Description
The HS2000E heater is an automatic thermostatically controlled blown air heating systems fuelled by gas or mains 230V electric. The heater is selectable between Gas (LPG, Butane or Propane) or mains 230V with three power levels available being 500W, 1kw or 2kW
Heatsource is designed for a variety of automotive and marine applications as a source of heat totally independent of the engine. Read the full technical details of the HS2000E Blown Air Heater as well as the complete range of Blown Air Heaters.
This particular version of the HS2000E (Digital Thermostat) comes with a digital thermostat which increases your control, displaying ambient and desired temperatures on the LED screen, as well as allow you to set the heater to come on at specific times of the day.
Select the relevant kit to suit your application. Each kit should contain enough parts to carry out an installation up to the connection to a 8mm or 5/16th gas pipe.
Kits are divided into two types, Vehicle (V) or Marine (M)
A single outlet vehicle kit (V1) contains
- 1 x 1 metre 60mm ducting
- 1 x 1 metre combustion inlet pipe
- 1 x 0.75 meter Stainless Steel Exhaust pipe
- 1 x Thermostat
- 3.5 metres thermostat wiring harness
- 3.5 metres 12v supply harness
- 1 directional hot air outlet
- 1 directional cool air return vent
- hose clips, fasteners, screws, inline fuse, instructions, drilling template
A twin outlet vehicle fitting kit (V2) contains:
- As a V1 kit with the addition of
- 1 x open/close vent
- 1 x Y branch
- Extra metre of 60mm hot air ducting
- Extra hose clips, fasteners and screws
A three outlet vehicle fitting kit (V3) contains:
- As V1 + V2
- And additional Y branch
- An additional open/close vent
- An extra metre of 60mm ducting – so 3 metres in total
- Extra hose clips, fasteners and screws as required.
A single outlet Marine fitting kit (M1) contains:
- 3 metres APK 60mm marine grade hot air ducting
- 2 x 1.5 metres stainless steel exhaust and combustion inlet pipe
- Through hull skin fitting
- Bulkhead mounting bracket
- Thermostat
- 3.5 metres thermostat wiring harness
- 3.5 metres 12v supply harness
- 1 directional hot air outlet
- 1 directional cool air return vent
- Hose clips, fasteners, screws, inline fuse, instructions, skin fitting drilling template
A twin outlet Marine fitting kit (M2) contains:
- As an M1 kit with the addition of
- 1 x open/close vent
- 1 x Y branch
- Extra metre of 60mm APK hot air ducting
- Extra hose clips, fasteners and screws
A three outlet Marine fitting kit (M3) contains:
- As M1 + M2
- An additional Y branch
- An additional open/close vent
- An extra metre of 60mm APK ducting – so 5 metres in total
- Extra hose clips, fasteners and screws as required.
All installations should be carried out by a competent person and in accordance with BS EN 1949:2002
Marine grade accessories, spares and upgrades for yachts, boats and other marine craft.
